|
- Refer to Data List Reference Table
.
- Item 24: Inhibitor switch P
- Item 25: Inhibitor switch R
- Item 26: Inhibitor switch N
- Item 27: Inhibitor switch D
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Replace the inhibitor switch.
|
|
|
|
Item 9: Linear solenoid 5
|
|
OK: Operating sound can be heard.
|
|
Q.
Is the check result normal?
|
|
Repair the B1 pressure control solenoid (SL5) system.
|
|
|
|
Check the installation status of inhibitor switch and transmission control cable.
|
|
Q.
Is the check result normal?
|
|
Adjust the inhibitor switch and the transmission control cable. (Refer to .)
|
|
|
|
If the trouble symptom is not solved, replace the valve body. Then, check the trouble symptom again.
|
|
Q.
Is the trouble symptom reproduced?
|
|
This diagnosis is complete.
|
|
|
|
(2)Test drive the vehicle.
|
|
(3)Verify that the condition described by the customer exists.
|
|
Q.
Is the trouble symptom reproduced?
|
|
Check the clutches and brakes for damage, and replace if necessary. (It is highly possible that the brake B1, and one-way clutch F1 that operate at shift change between 1st and 2nd are damaged.)
|
|
|
|
This diagnosis is complete.
|
|
|