|
Disconnect the connector, and measure the resistance between terminal SLUG line and terminal
SLU line at the solenoid side.
|
|
OK: 5.0 - 5.6 Ω (A/T fluid temperature 20°C)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair or replace the solenoid harness or valve body (lock-up solenoid).
|
|
|
|
Disconnect the connector, and measure the resistance between terminal SLU line and terminal
SLUG line at the harness side.
|
|
OK: 5.0 - 5.6 Ω (A/T fluid temperature 20°C)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or the wiring harness.
|
|
|
|
Check again if the diagnosis code is set.
|
|
Q.
Is diagnosis code No.P2762 set?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunction).
|
|
|