|
Disconnect the connector, and measure the resistance between terminal SLU line and terminal
SLUG line at the harness side.
|
|
OK: 5.0 - 5.6 Ω (A/T fluid temperature 20°C)
|
|
Q.
Is the check result normal?
|
|
Disconnect the connector, and measure the resistance between terminal SLU line and terminal
SLUG line at the transmission wiring harness side.
|
|
OK: 5.0 - 5.6 Ω (A/T fluid temperature 20°C)
|
|
Q.
Is the check result normal?
|
|
- Disconnect the connector, and measure the resistance between terminal SLU
and body earth at the wiring harness side.
- Disconnect the connector, and measure the resistance between terminal SLUG and body
earth at the wiring harness side.
|
|
Q.
Is the check result normal?
|
|
- Disconnect the connector, and measure the resistance between terminal SLU
and body earth at the transmission assembly side.
- Disconnect the connector, and measure the resistance between terminal SLUG and body
earth at the transmission assembly side.
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunction ).
|
|
|
|
Repair the connector(s) or the wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair or replace the transmission wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunction ).
|
|
|
|
Replace the valve body (lock-up pressure control solenoid).
|
|
|
|
- Ignition switch: "LOCK"(OFF) → "ON"
- Check again if the diagnosis code is set.
|
|
Q.
Is diagnosis code No.P2764 set?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunction ).
|
|
|