|
- Use M.U.T.-III to perform CAN bus line diagnosis.
|
|
Q.
Is the check result normal?
|
|
Repair CAN bus line (Refer to GROUP 54C - Troubleshooting - CAN Bus Diagnostics Table ).
|
|
|
|
Check that the other ECU performing CAN communication with combination meter sets diagnosis code No.U0155, U1108.
|
|
Q.
Is diagnosis code set?
|
|
- Erase the set diagnosis code.
- Ignition switch: "LOCK" (OFF) → "ON"
- Confirm whether the diagnosis code is set.
|
|
Q.
Is diagnosis code No.U0155 set?
|
|
Replace the combination meter.
|
|
|
|
Intermittent malfunction in CAN bus line between A/T-ECU and combination meter (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Erase the set diagnosis code.
- Ignition switch: "LOCK" (OFF) → "ON"
- Confirm whether the diagnosis code is set.
|
|
Q.
Is diagnosis code No.U0155 set?
|
|
Intermittent malfunction in CAN bus line between A/T-ECU and combination meter (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|