![](../../../img/23/AK801395AA00ENG.png)
|
Using vernier calipers, measure the
free length of the brake piston return spring sub-assembly
No. 3. Standard value: 15.72 mm (For brake
piston return spring sub-assembly No. 3)
|
![](../../../img/23/AK801263AB00ENG.png)
|
Check the lining of all
discs.
note |
- If the lining is flaking or discoloured,
or if it is worn or the print mark is
wearing away, replace the discs with a
new one. When replacing, check the
contact surfaces between the disc, the
plate, the flange and the cushion plate.
If they are scratched or discoloured,
replace the discs, plates, flange and
cushion plate with new ones.
- Before replacing with new discs, soak
them in ATF at least 2 hours.
|
|
![](../../../img/23/AK801396AA00ENG.png)
|
Using vernier calipers, measure the
free length of the brake piston return spring
sub-assembly. Standard value: 17.05 mm (For
brake piston return spring sub-assembly)
|
![](../../../img/23/AK801397AB00ENG.png)
|
Check the lining of all
discs.
note |
- If the lining is flaking or discoloured,
or if it is worn or the print mark is
wearing away, replace the discs with a
new one. When replacing, check the
contact surfaces between the disc, plate
and flange. If they are scratched or
discoloured, replace the discs, plates
and flange with new parts.
- Before replacing with new discs, soak
them in ATF at least 2 hours.
|
|
![](../../../img/23/AK801398AB00ENG.png)
|
Hold the one-way clutch inner race
sub-assembly place. Check that the one-way clutch No. 1
rotates when turned anti-clockwise and does not rotate when
turned clockwise.
|
![](../../../img/23/AK801399AB00ENG.png)
|
Hold the reverse clutch hub
sub-assembly in place. Check that the one-way clutch No. 2
rotates when turned clockwise and does not rotate when
turned anti-clockwise.
|