![](../../../img/23/ACE02260AB00ENG.png)
|
1.Use special tool remover
(MD998801), remove the ball bearing. 2.Press the
rear output shaft with a press and remove the ball
bearing.
|
![](../../../img/23/AK500606AC00ENG.png)
|
1.Check the installation
direction of the ball bearing, and put it on the rear output
shaft.
|
![](../../../img/23/ACE02261AB00ENG.png)
|
2.Use the special tools to
install the ball bearing.
- Installer(100) (MD998813)
- Installer adapter(44) (MD998821)
3.Press the rear output shaft with a press and
install the ball bearing.
|
![](../../../img/23/AK403646AB00ENG.png)
|
Install two synch springs. When
installing the springs, Make sure that steps of front and
rear spring s are positioned on a synch key, but not on the
same key.
|