|
1.Place the gearshift lever
to the "N" (neutral position) <M/T> or the
selector lever to the "N" position
<A/T>.
|
|
2.Then place the transfer
shift lever to the "2WD" position.
<4WD>
|
|
3.Check the propeller shaft
for dent, damage or crack.
|
![](../../../img/25/AC808283AB00ENG.png)
![](../../../img/25/AC510591AB00ENG.png)
|
4.Check the propeller shaft
universal joint, oil seal for crack or damage. If
abnormality is recognised, replace the universal joint with
a new one.
|
|
1.Place the gearshift lever
to the "N" (neutral position) <M/T> or the
selector lever to the "N" position
<A/T>.
|
|
2.Then place the transfer
shift lever to the "2WD" position.
<4WD>
|
![](../../../img/25/AC501206AC00ENG.png)
|
3.Hold the tube of propeller
shaft by one hand, and apply force by the other hand to the
flange yoke or sleeve yoke in rotating direction, axial
direction, and perpendicular direction for checking
looseness. If looseness is recognised, replace the universal
joint with a new one.
|