FRONT HUB ASSEMBLY DISASSEMBLY AND REASSEMBLY



Disassembly steps
<<A>>
 >>A<<
 1.
 Unit bearing


2.
 Hub

DISASSEMBLY SERVICE POINTS

<<A>> UNIT BEARING REMOVAL

1.
caution Whenever the unit bearing is removed from the hub, it must be replaced with new one.
Use the following special tools to remove the unit bearing from the hub.

  • Upper & lower arm bush arbour (MB991153)
  • Remover (MD998917)

2.Use nippers to cut the roller guide to pull out the inner race, which is left on the hub. Then remove the roller and the roller guide.

3.Hook the special tool Remover (MD998917) to the stepped portion between the hub and inner race. Then pull out the inner race from the hub.

REASSEMBLY SERVICE POINT

>>A<< UNIT BEARING INSTALLATION

Use the following special tools to press-fit the unit bearing to the hub.

  • Lower arm bush installer & remover B (MB990649)
  • Oil seal installer (MB990727)