![](../../../img/26/ACE02535AB00ENG.png)
|
1.Remove the under cover,
filler plug and gasket.
|
![](../../../img/26/AC700330BS00ENG.png)
|
2.Check that the oil level
is in between the upper limit (bottom of the filler plug
hole)
and the lower limit as shown. 3.If the oil level
is not in between the upper limit and the lower limit,
refill the
specified oil to the bottom of the oil filler plug
hole. Specified gear oil: Mitsubishi Motors
Genuine Super Hypoid Gear Oil ECOLOGY API GL-5 SAE
80 4.Install the filler plug and new
gasket, and tighten to the specified
torque. Tightening torque: 50 ± 10
N·m 5.Install the under
cover.
|