GENERAL INFORMATION

The rear axle has the following features:

A banjo type semi-floating type axle has been incorporated.
The wheel bearing is a double taper roller bearing and is highly resistant to a thrust load.
ABS rotor for detecting the wheel speed is press-fitted to the retainer.
Dynamic damper has been installed to prevent the muffled sound.
Rear differential lock system has been adopted as optional.

CONSTRUCTION DIAGRAM

<Vehicles with rear drum brake>

<Vehicles with rear disc brake>

REAR AXLE

Item		With rear drum brake	With rear disc brake
Axle housing	Type	Banjo	Banjo
Axle shaft	Type	Semi-floating	Semi-floating
	Shaft outer diameter (bearing part × centre part) × length mm	40.0 × 34.5 × 736	40.0 × 34.5 × 731
	Bearing type	Double taper roller	Double taper roller
	Bearing (OD × ID) mm	80 × 40	80 × 40

DIFFERENTIAL

<Vehicles with rear drum brake>

Item		Specification
Item		2400 (4G6)
Reduction gear type		Hypoid gear
Reduction ratio		4.900
Differential gear type (Type × number of gears)	Side gear	Straight bevel gear × 2
Differential gear type (Type × number of gears)	Pinion gear	Straight bevel gear × 2
Differential type	Standard equipment	Normal differential
Differential type	Optional equipment	None

<Vehicles with rear disc brake>

Item		Specification
Item		3000 (6B3)	2400 (4N1)
Reduction gear type		Hypoid gear	Hypoid gear
Reduction ratio		3.917	3.692
Differential gear type (Type × number of gears)	Side gear	Straight bevel gear × 2	Straight bevel gear × 2
Differential gear type (Type × number of gears)	Pinion gear	Straight bevel gear × 2	Straight bevel gear × 2
Differential type	Standard equipment	Normal differential	Normal differential
Differential type	Optional equipment	None	None <2WD>, Differential lock system <4WD>