|
- Check the stabilizer rubbers and stabilizer bushings
for wear and deterioration.
- Check the stabilizer bar for deterioration or
damage.
- Check all bolts for condition and
straightness.
|
![](../../../img/33/AC404845AD00ENG.png)
|
1.After shaking the ball
joint stud several times, install the nut to the stud and
use special tool preload socket (MB990326) to measure the
turning torque of the ball joint. Standard
value: 0.1 or more 2.When the measured
value exceeds the standard value, replace the stabilizer
link (Refer to ). 3.When
the measured value is lower than the standard value, check
that the ball joint turns smoothly without excessive play.
If so, it is possible to re-use that ball joint.
|
|
1.Check the dust cover for
cracks or damage by pushing it with your finger.
|
|
2.If the dust cover is
cracked or damaged, replace the stabilizer link (Refer to ).
note |
Cracks or damage of the dust
cover may cause damage to the ball
joint.
|
|