REMOVAL AND INSTALLATION
caution
*: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the earth in an unladen condition.
Pre-removal Operation
Support the rear axle assembly with a jack
Post-installation Operation
Check the beam direction of the headlamp (Low beam) (Refer to GROUP 54A - Headlamp Aiming
). <Vehicles with headlamp automatic levelling system>
Removal steps
·
Height sensor (rear) (Refer to GROUP 54A, Headlamp Automatic Levelling System
) <Vehicles with headlamp automatic levelling system>
1.
Rear wheel speed sensor cable/parking brake cable to lower arm connection bolt
2.
Bolt assembly
·
Shock absorber mounting bolt (Refer to
)
3.
Lower arm