REMOVAL AND INSTALLATION


caution *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the earth in an unladen condition.
Pre-removal Operation
  • Support the rear axle assembly with a jack

 Post-installation Operation
  • Check the beam direction of the headlamp (Low beam) (Refer to GROUP 54A - Headlamp Aiming ). <Vehicles with headlamp automatic levelling system>




Shock absorber removal steps


·
 Height sensor (rear) (Refer to GROUP 54A, Headlamp Automatic Levelling System ) <Vehicles with headlamp automatic levelling system>


1.
 Shock absorber mounting bolt


2.
 Shock absorber



Lateral rod removal steps


·
 Height sensor (rear) (Refer to GROUP 54A, Headlamp Automatic Levelling System ) <Vehicles with headlamp automatic levelling system>


3.
 Rear wheel speed sensor cable (LH)/parking brake cable (LH) to lower arm (LH) connection bolt


4.
 Lower arm (LH) to rear axle assembly connection


5.
 Lateral rod