|
1.Turn up the carpet, etc.
under the brake pedal.
|
![](../../../img/35/ACE02990AC00ENG.png)
|
2.Pierce a needle or similar
material to the silencer and melting sheets, and measure the
thickness of "D" shown in the figure. 3.Start the
engine, depress the brake pedal with approximately 500 N of
force, and measure
the distance "E" between the silencer and brake pedal shown
in the figure. 4.Check that the total value of "D"
and "E" measured in the previous items 2 and 3 is
within the standard value. Standard value (D
+ E): 70 mm or more <4D5> (From
the surface of dash panel to the face of pedal
pad) 5.If the clearance is outside the
standard value, check for air trapped in the brake
line, thickness of the disc brake pad, clearance between the
lining and the drum and dragging
in the parking brake. And then adjust and replace defective
parts as required. 6.Return the carpet etc. to its
original position.
|