REMOVAL AND INSTALLATION <6B3>


Pre-removal Operation
  • Brake Fluid Draining

 Post-installation Operation
  • Brake Fluid Supplying and Air Bleeding (Refer to ).
  • Brake Pedal Adjustment (Refer to ).




Removal steps


1.
 Brake fluid level switch connector


2.
 Brake master cylinder assembly and brake pipe connection


3.
 Harness clip


4.
 Harness bracket


5.
 Brake master cylinder assembly


6.
 O-ring

>>A<<
 7.
 Vacuum hose

>>A<<
 8.
 Hose clip

>>A<<
 9.
 Clamp


10.
 Snap pin


11.
 Clevis pin


12.
 Brake booster mounting nut


13.
 Sealer


14.
 Brake booster assembly

INSTALLATION SERVICE POINTS

>>A<< VACUUM HOSE AND HOSE CLIP INSTALLATION



  1. Install the vacuum hose with its marking located as shown in the figure.
  2. Install the hose clip located as shown in the figure.