|
When disassembling the disc brakes,
disassemble both sides (left and right) as a set.
|
![](../../../img/35/ACX00697AA00ENG.png)
|
caution |
Blow air little by little to
remove the piston. The piston will rush out if a
force of
air is applied suddenly.
|
Place a piece of wood, etc. against the caliper body
as shown. Blow compressed air through
the brake hose to remove the piston boot and
piston.
|
![](../../../img/35/ACX00689AA00ENG.png)
|
1.
caution |
Do not use a flat-tipped
screwdriver or similar tool
to remove piston seal. These may damage the
inner side of the cylinder.
|
Remove the piston seal with your finger
tip. 2.Clean the piston surface and inner cylinder
with alcohol or brake fluid DOT 3 or DOT 4.
|