|
|
Check that ABS warning lamp and
brake warning lamp illuminate as follows.
|
|
1.When the ignition switch
is turned to the "ON" position, ABS warning lamps and brake
warning lamps illuminate.
2.The ABS warning lamps
and brake warning lamps illuminate for three
seconds*1 and then turn
"OFF"*2.
3.Otherwise, check the
diagnosis code.
| note |
- *1: The ABS warning
lamp may stay "ON" until the vehicle
speed reaches 25 km/h. As far as
ABS-ECU sets any diagnosis code related
to the wheel speed sensor malfunction or
the motor malfunction as past trouble,
ABS-ECU continues illuminating the ABS
warning lamp until it verifies that the
malfunction for that code is resolved
(startup check).
- *2: The brake warning
lamp does not turn "OFF" when the
parking brake is applied or the brake
fluid level is lowered.
|
|