|
1.As shown in the figure,
connect the circuit tester to the forward collision
mitigation system (FCM) and Ultrasonic misacceleration
Mitigation System ON/OFF switch as a single
unit.
2.Check the continuity status when the
forward collision mitigation system (FCM) and Ultrasonic
misacceleration Mitigation System ON/OFF switch is pressed
and when the switch is released.
|
|
Item
|
When the forward
collision mitigation system
(FCM) and Ultrasonic
misacceleration Mitigation
System ON/OFF switch is released
(Not being
operated)
|
When the forward
collision mitigation system
(FCM) and Ultrasonic
misacceleration Mitigation
System ON/OFF switch is
pressed
|
Continuity between
terminal No. 11 and No. 14
|
No continuity
|
Continuity exists (2
Ω or less)
|
Continuity between
terminal No. 12 and No. 13
|
Continuity
exists
|
Continuity
exists
|
|
|