OFF-ROAD MODE SELECTOR CONTINUITY CHECK



 1.As shown in the figure, connect the circuit tester to the off-road mode selector as a single unit.
2.Check the continuity status when the off-road mode selector is pressed and when the switch is released.
Item
 When the off-road mode selector is released (Not being operated)
 When the off-road mode selector is pressed
Continuity between terminal No. 10 and No. 13
 No continuity
 Continuity exists (2 Ω or less)
Continuity between terminal No. 11 and No. 12
 Continuity exists
 Continuity exists