|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting ). On completion, go to Step 2.
|
|
|
|
Q.
Is diagnosis code No. U1100 set?
|
|
This diagnosis is complete.
|
|
|
|
Check if the diagnosis code is set in the engine-ECU (Refer to GROUP 13B - Diagnosis Code Chart <6B3> or GROUP 13C - Diagnosis Code Chart <4N1>).
|
|
Q.
Is the diagnosis code set?
|
|
Troubleshoot the engine-ECU diagnosis code. Then go to Step 5.
|
|
|
|
Check whether an engine "time-out" related diagnosis code is set in other ECUs.
|
|
Q.
Is the diagnosis code set?
|
|
Replace the engine-ECU (Refer to GROUP 13B - Engine-ECU <6B3> or GROUP 13C - Engine-ECU <4N1>). Then go to Step 5.
|
|
|
|
Check again if the diagnosis code is set.
|
|
(1)Erase the set diagnosis code.
|
|
(2)Ignition switch: "LOCK" (OFF)
|
|
Q.
Is diagnosis code No. U1100 set?
|
|
Replace the hydraulic unit assembly (integrated with ASTC-ECU) (Refer to ).
|
|
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).
|
|
|