Code No.C1751: ACC/FCM ECU failure
Code No.C2296: CAN buffer error
Code No.C2297: CAN transmit error
caution |
- When the FCM-ECU is replaced, calibrate the radar (refer to
).
|
OPERATION
FCM-ECU monitors the malfunction in the ECU.
DIAGNOSIS CODE SET CONDITION
This diagnosis code is set when the abnormality below is detected:
- A malfunction is detected inside the FCM-ECU.
PROBABLE CAUSES
- Malfunction of the FCM-ECU
|
STEP 1. M.U.T.-III CAN bus diagnostics.
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2.
|
|
|
|
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting ). On completion, go to Step 2.
|
|
|
|
STEP 2. Check whether the diagnosis code is set again.
|
|
Check again if the diagnosis code is set in the FCM-ECU.
|
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
|
|
(4)On completion, check that the diagnosis code is set again.
|
|
Q.
Is diagnosis code No. C1394 set?
|
|
Replace the FCM-ECU (Refer to ).
|
|
|
|
This diagnosis is complete.
|
|
|