Code No. C2263:
Yaw Rate Offset Threshold Exceed
caution |
- If there is any problem in the
CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the
CAN bus lines (Refer to GROUP 54C - Troubleshooting
).
- Whenever the ECU is replaced, ensure that the CAN bus lines are normal.
- When the hydraulic unit assembly (integrated with ASTC-ECU) is replaced, always
carry out the calibration of the steering wheel sensor and the G sensor.
- When the ACC/FCM-ECU is replaced, calibrate the radar (refer to
).
|
OPERATION
ACC/FCM-ECU communicates with the ASTC-ECU via the CAN bus lines.
DIAGNOSIS CODE SET CONDITION
This diagnosis code is set when the abnormality below is detected:
- The yaw rate sensor output value deviates from the actual value.
PROBABLE CAUSES
- Malfunction of the CAN bus line
- ASTC system fault (yaw rate sensor fault)
- Malfunction of the ACC/FCM-ECU
|
STEP 1. M.U.T.-III CAN bus diagnostics.
|
|
Use M.U.T.-III to perform the CAN bus diagnosis.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2.
|
|
|
|
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting ).
On completion, go to Step 2.
|
|
|
|
STEP 2. Use M.U.T.-III to confirm a diagnosis code of other systems.
|
|
Check if the diagnosis code is set in the ASTC-ECU.
|
|
Q.
Is the diagnosis code set?
|
|
Troubleshoot the ASTC-ECU diagnosis code (Refer to ).
|
|
|
|
Go to Step 3.
|
|
|
|
STEP 3. M.U.T.-III data list of other systems.
|
|
Check the ASTC-ECU data list.
|
|
- Item No. 08: Yaw rate sensor
|
|
Q.
Is the check result normal?
|
|
Go to Step 4.
|
|
|
|
Replace the hydraulic unit assembly (integrated with yaw rate sensor).
|
|
|
|
STEP 4. Check whether the diagnosis code is set again.
|
|
Check again if the diagnosis code is set in the ACC/FCM-ECU.
|
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
|
|
(4)Press the FCM and UMS ON/OFF switch to turn the FCM system to ON.
|
|
(5)On completion, check that the diagnosis code is set again.
|
|
Q.
Is diagnosis code No. C2263 set?
|
|
Replace the ACC/FCM-ECU (Refer to ).
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunction).
|
|
|