|
Perform lining seating by the
following procedure when replacing the parking brake shoe
assemblies or the rear brake discs, or when brake
performance is insufficient.
|
|
1.Adjust the parking brake
lever stroke to the standard value (Refer to ).
|
![](../../../img/36/ACX00701AF01ENG.png)
|
2.Hook a spring balance onto
the centre of the parking brake lever grip and pull it with
a force of 98 -
147 N in a direction perpendicular to the
handle. 3.Drive the vehicle at a constant speed of
35 -
50 km/h for 100 meters. 4.Release the
parking brake and let the brakes cool for five to ten
minutes. 5.Repeat the procedure in steps 2. to 4.
four to five times.
|