Code No. U1073:
Bus-off
caution |
- If there is any
problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis,
diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table
).
- Whenever ECU is replaced, ensure that the CAN bus lines are normal.
|
DIAGNOSIS CODE SET CONDITIONS
This diagnosis code is set when electric parking brake ECU has ceased the CAN communication (bus
off).
PROBABLE CAUSES
- The CAN bus line is defective.
- Malfunction of the electric parking brake ECU
- Damaged wiring harness or connector
|
STEP 1. M.U.T.-III CAN bus diagnosis
|
|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 3.
|
|
|
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ).
On completion, go to Step 2.
|
|
|
|
STEP 2. Diagnosis code recheck after resetting CAN bus lines
|
|
Q.
Is diagnosis code No. U1073 set?
|
|
Go to Step 3.
|
|
|
|
This diagnosis is complete.
|
|
|
|
STEP 3. Check whether the diagnosis code is set again.
|
|
Check again if the diagnosis code is set.
|
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch to the LOCK (OFF) position.
|
|
(3)Turn the ignition switch to the ON position.
|
|
(4)Check if the diagnosis code is set.
|
|
Q.
Is diagnosis code No. U1073 set?
|
|
Replace the electric parking brake ECU (Refer to ).
|
|
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|