![](../../../img/37/AC000756AB00ENG.png)
|
1.Place the front wheel on a
turning radius gauge and measure the steering
angle.
|
Item
|
Standard
value
|
Inner
wheel
|
36°50’
±
2°00’*
|
Outer wheel
(reference value)
|
32°40’
|
|
note |
*: Difference between
right and left wheels must be 2°00’
or less.
|
2.If the steering angle is not within the
standard value, adjust the toe-in as
follows. Standard value:
at
the centre of tyre tread: 0 - 5
mm Toe-angle (per wheel): 0° 00’
- 0°12’
|
![](../../../img/37/AC510224AB00ENG.png)
|
3.Adjust the toe-in by
undoing the clip and lock nut, and turning the left and
right tie rod turnbuckles by the same amount (in opposite
directions).
note |
The toe will move out as the
left turnbuckle is turned toward the front of
the vehicle and the right turnbuckle is turned
toward the rear of the vehicle.
|
4.Tighten the lock nut to the specified
torque, and tighten the bellows by the
clip. Tightening torque: 93 ± 15
N·m 5.Recheck the steering
angle.
|