REMOVAL AND INSTALLATION

Pre-removal OperationPower steering fluid draining (Refer to ).

Post-installation OperationPower steering fluid refilling (Refer to ) and bleeding (Refer to ).

<4G6> Removal steps 1. Power steering oil reservoir cap 2. Power steering oil reservoir 3. O-ring 4. Clip 5. Clip >>E<< 6. Power steering oil return hose 7. Clip >>D<< 8. Power steering oil pump suction hose 9. Eye bolt 10. Gasket >>C<< 11. Power steering oil pressure hose >>A<< 12. Power steering oil pressure tube 13. O-ring 14. Power steering oil line bracket A 15. Power steering oil line bracket B 16. Clip 17. Power steering oil return tube >>B<< 18. Power steering oil return hose >>A<< 19. Power steering oil return tube 20. O-ring

<4N1, 6B3> Removal steps 1. Power steering oil reservoir cap 2. Power steering oil reservoir 3. O-ring 4. Power steering oil line bracket A 5. Clip 6. Clip >>E<< 7. Power steering oil return hose 8. Clip >>D<< 9. Power steering oil pump suction hose 10. Eye bolt 11. Gasket 12. Power steering oil line bracket B <4N1> 13. Pressure hose bracket <6B3> >>C<< 14. Power steering oil pressure hose >>A<< 15. Power steering oil pressure tube 16. Power steering oil line bracket C 17. O-ring 18. Clip 19. Power steering oil return tube >>B<< 20. Power steering oil return hose >>A<< 21. Power steering oil return tube 22. O-ring

1.Align the mating marks on the gear box, return tube assembly and pressure tube assembly when installing.

2.Use crowfoot wrench(MB992211) to connect the power steering oil return tube and power steering oil pressure tube.

1.Install the clips as shown in the figure. 2.Install so that the mating marks are faced forward.

2.Place the pressure hose stopper to touch the power steering oil pump stopper, and install the pressure hose assembly.