REMOVAL AND INSTALLATION



Removal steps


1.
 Body mounting nut


2.
 Body mounting cushion


3.
 Body mounting spacer


4.
 Body mounting cushion


5.
 Body mounting washer


6.
 Body mounting bolt


7.
 Weight


8.
 Body mounting stopper
<<A>>
·
 Body

REMOVAL SERVICE POINTS

<<A>> BODY REMOVAL
1.Remove or disconnect the following parts:

  • Hood
  • Radiator grille
  • Headlamp
  • Front bumper assembly
  • Oil cooler hose <Vehicles with oil cooler>
  • Radiator assembly
  • Air cleaner duct
  • Steering shaft joint
  • Heater hose
  • Power steering reservoir tank
  • Brake booster vacuum hose
  • Accelerator cable
  • Fuel hose
  • Brake pipe
  • A/C piping
  • Clutch release cylinder <Vehicles with manual transmission>
  • Speedometer cable
  • Parking brake cable
  • Shift lever knob <Vehicles with manual transmission>
  • Select lever knob <Vehicles with automatic transmission>
  • Idle up vacuum hose
  • Engine harness
  • A/C harness
  • Frame harness
  • Earth strap
  • Engine earth
  • Door opening weatherstrip inner
  • Floor carpet
2.
caution Before lifting the vehicle, check to be sure that all connections between body, frame and engine are separated. Connect sling wires to suitable bar or frame, fitting protection covers as necessary.
After removing the body mounting bolts and the body washers, insert wooden blocks to the body. Gently lift the vehicle with a crane.