REMOVAL AND INSTALLATION


Pre-removal and post-installation operation
  • Tailgate Trim removal and installation (Refer to GROUP 52A - Tailgate Trim ).
  • Rear Wiper Motor Assembly removal and installation (Refer to GROUP 51 - Rear Wiper and Washer ).
  • High-mounted Stop Lamp Assembly removal and installation (Refer to GROUP 54A - High-mounted Stop Lamp ).





Removal steps


·
 Harness connector
<<A>>
 >>B<<
 1.
 Tailgate window glass

>>A<<
 2.
 Fastener

>>A<<
 3.
 Glass stopper

>>A<<
 4.
 Tailgate spacer

REMOVAL SERVICE POINT

<<A>> TAILGATE WINDOW GLASS REMOVAL
Remove the tailgate window glass by the same procedures as for the windshield glass (Refer to ).
note Use a piano wire to remove the tailgate window glass.

INSTALLATION SERVICE POINTS

>>A<< TAILGATE SPACER/GLASS STOPPER/FASTENER INSTALLATION
1.Use the parts cleaner (MZ100387 or equivalent) to degrease the inside circumference of the tailgate window glass and tailgate flanges.
2.

Install the Tailgate spacer, glass stopper and fastener to the specified position on the tailgate window glass

3.Install the fasteners to the specified positions on the tailgate flange.

>>B<< TAILGATE WINDOW GLASS INSTALLATION
1.Apply the primer and adhesive.
2.Install the tailgate window glass by the same procedure as for the windshield glass (refer to ).