|
|
1.Remove the rear end trim
(Refer to GROUP 52A - Interior Trims  ).
|
|
2.Replace the striker
mounting screws with temporary bolts, and use the remover
bar (special tool: MB990939) and a hammer to tap the
temporary bolt to the desired direction.
3.Tighten
the striker mounting screws.
Tightening torque:
21 ± 4 N·m
|
|
|
1.Remove the headlining
(Refer to GROUP 52A - Headlining ).
|
|
2.Loosen the tailgate
hinge-to-body mounting nuts to adjust the clearance between
the tailgate and body.
3.Tighten the tailgate
hinge mounting bolts.
Tightening torque: 20
± 2 N·m
|