REMOVAL AND INSTALLATION


Post-installation Operation
  • Water Test (Refer to ).
  • Sunroof Fit Adjustment (Refer to ).
  • Learning Procedures Of The Sunroof Fully Closed Position (Refer to ).




Sunroof switch removal


·
 Front room lamp (Refer to GROUP 54A - Room Lamp )



Sunroof lid glass assembly removal


1.
 Sunroof lid glass assembly



Sunroof motor assembly removal steps


·
 Headlining (Refer to GROUP 52A - Headlining )


·
 Room lamp bracket (Refer to GROUP 54A - Room Lamp )

>>C<<
 2.
 Sunroof motor assembly


3.
 Motor pad



Sunroof assembly removal steps


·
 Headlining (Refer to GROUP 52A - Headlining )


·
 Room lamp bracket (Refer to GROUP 54A - Room Lamp )


4.
 Drain pipe connection


5.
 Sunroof assembly



Drain pipe removal steps


·
 Headlining (Refer to GROUP 52A - Headlining )


·
 Instrument panel assembly (RH only) (Refer to GROUP 52A - Instrument Panel Assembly)

>>B<<
 6.
 Front drain pipe


·
 Joint duct and rear cooling unit assembly <Vehicles with rear cooler> (Refer to GROUP 55A - Rear Cooler Unit)


7.
 Curtain air bag module mounting bolts <Vehicles with curtain air bag>

>>B<<
 8.
 Rear drain pipe

>>A<<
 9.
 Clip

INSTALLATION SERVICE POINT

>>A<< CLIP INSTALLATION

Align the clips with the locating marks on the drain pipe.

>>B<< FRONT DRAIN PIPE AND REAR DRAIN PIPE INSTALLATION

Install the grommet. Adjust the front and rear drain pipe projection as shown in the illustration.

>>C<< SUNROOF MOTOR ASSEMBLY INSTALLATION
To install the sunroof motor assembly, tighten the mounting bolts alternately left and right and evenly in several stages.