![](../../../img/42/ACF02926AB00ENG.png)
|
1.Remove the sunroof fuse to
check that it is normal, and connect a circuit tester as
shown. 2.Turn ON the sunroof switch, then measure
the operating current of the intermediary
segment except when operation is starting, the sunroof is
fully closed, the sunroof is fully opened
and the sunroof is tilted fully up. Standard
value: 3 A or less (at 20
°C) 3.Check the following areas if
the operating current of the sunroof lid glass is outside
the standard value:
- Improperly installed sunroof assembly, deformation
or
any foreign substances
- Improperly fastened drive cable
- Tilting of sunroof lid glass
|