|
|
Perform the following initialisation when the anti-trap function has been triggered 5
times or more, or the sunroof motor assembly is removed.
|
|
|
1.Press the close/tilt-down switch to move the sunroof lid glass to the fully-tilted-up
position. Each switch operation makes the sunroof lid glass move by approximately 30 mm and
stops it automatically. Repeat the operation to move the sunroof lid glass to the fully-tilted-up
position.
|
|
|
2.Hold the close/tilt-down switch for 3 seconds.
| note |
If the close/tilt-down switch is released while the sunroof is moving, the initialisation
will be cancelled. If this happens, repeat the procedures from the beginning.
|
|
|
|
3.Press the open switch to move the sunroof lid glass to the fully-open position.
|
|
|
4.Press the close/tilt-down switch to move the sunroof lid glass to the fully-closed
position.
|