INSPECTION


POWER WINDOW MAIN SWITCH CONTINUITY CHECK


<FRONT PASSENGER’S SWITCH>
Switch position
 Tester connection
 Specified condition
UP
 7* - 11, 10 - 12
 Continuity exists (2 Ω or less)
OFF
 7* - 11, 7* - 12
DOWN
 7* - 12, 10- 11
note *: Set the window lock switch to UNLOCK position.

<REAR PASSENGER’S LEFT SWITCH>
Switch position
 Tester connection
 Specified condition
UP
 1 -7*, 2 - 10
 Continuity exists (2 Ω or less)
OFF
 1 -7*, 2 -7*
DOWN
 1 - 10, 2 -7*
note *: Set the window lock switch to UNLOCK position.

<REAR PASSENGER’S RIGHT SWITCH>
Switch position
 Tester connection
 Specified condition
UP
 7* - 8, 9 - 10
 Continuity exists (2 Ω or less)
OFF
 7* - 8, 7* - 9
DOWN
 7* - 9, 8 - 10
note *: Set the window lock switch to UNLOCK position.

POWER WINDOW SUB SWITCH CONTINUITY CHECK

Switch position
 Tester connection
 Specified condition
UP
 4 - 5, 6 - 7
 Continuity exists (2 Ω or less)
OFF
 4 - 5, 7 - 8
DOWN
 4 - 6, 7 - 8

POWER WINDOW MOTOR CONTINUITY CHECK
1.Connect a battery to the motor terminals and check that the motor runs smoothly.
2.Check that the motor runs in the opposite direction when the battery is connected with the polarity reversed.
3.If a defect is found, replace the power window motor assembly.


<FRONT DOOR (driver’s side)>
Battery connection
 Slider position

  • Connect terminal No. 1 to the negative battery terminal.
  • Connect terminal No. 3 to the positive battery terminal.

 UP

  • Connect terminal No. 3 to the negative battery terminal.
  • Connect terminal No. 1 to the positive battery terminal.

 DOWN

<FRONT DOOR (passenger’s side)>
Battery connection
 Slider position

  • Connect terminal No. 1 to the negative battery terminal.
  • Connect terminal No. 2 to the positive battery terminal.

 UP

  • Connect terminal No. 2 to the negative battery terminal.
  • Connect terminal No. 1 to the positive battery terminal.

 DOWN


<REAR DOOR>
Battery connection
 Slider position

  • Connect terminal No. 2 to the negative battery terminal.
  • Connect terminal No. 1 to the positive battery terminal.

 UP

  • Connect terminal No. 1 to the negative battery terminal.
  • Connect terminal No. 2 to the positive battery terminal.

 DOWN