When you remove/install
or replace the camera, you should check the camera
image on the multi around monitor "Bird-eye
view." Always calibrate the monitor (Refer to ).
<Vehicles
with multi around monitor>
To ensure the camera image is clearly visible, wipe
the lens with a damped rag and
then a dry rag to remove dust, rain drops or
snow.
Be careful not to damage the camera. Any damage may
have an adverse effect on the
screen image.
Removal steps
1.
Upper
bar cover
·
Front
view camera connector connection <Vehicle
with front
view camera>
<<A>>
2.
Radiator grille assembly
3.
Front
view camera <Vehicle with front view
camera>
4.
Radiator grille cover
REMOVAL SERVICE POINT
<<A>> RADIATOR GRILLE ASSEMBLY
REMOVAL
Disengage the tab of the radiator
grille assembly, and then pull out it towards you.