ROOF DRIP MOULDING REMOVAL AND INSTALLATION <VEHICLES WITHOUT ROOF RACK>

		Removal steps
	1.	Roof drip moulding assembly
>>A<<	2.	Roof drip moulding clip (front side)
>>A<<	3.	Roof drip moulding clip (rear side)

INSTALLATION SERVICE POINT

>>A<< ROOF DRIP MOULDING CLIP INSTALLATION

1.Remove any remnants of the old tape. Then degrease the adhesion surface by using a cloth moistened with Mitsubishi Genuine Parts Cleaner (MZ100387).

2.Apply the specified adhesive to the adhesion surface of the roof moulding clip.
Specified adhesive: 3M-DP-8010 or equivalent

3.Adhere the roof drip moulding clip as shown.
4.Wait for at least 10 minutes. Then install the roof drip moulding.