![](../../../img/51/ACE02777AB00ENG.png)
|
1.Remove the washer tank
assembly with the washer hose connected. Then fill the
washer tank with water. 2.Check to see that the
water is vigorously sprayed when connecting the terminals as
shown in the illustration.
|
|
Check the windshield washer switch
from the ETACS diagnosis codes for proper operation (Refer
to GROUP 54A, ETACS ).
|
|
1.Use the special tool,
washer nozzle adjustment tool (MB992326) to adjust the
splashing points of the nozzle.
|
![](../../../img/51/AC900640AB00ENG.png)
|
2.Insert the jet type washer
nozzle adjusting side of the special tool (MB992326) into
the injection part of the washer nozzle as shown in figure
(A). 3.Move the special tool (MB992326) up and
down to adjust the angle of the washer nozzle.
|