|
|
1.Installation position
Attach the mark to the position shown in the
illustration.
|
|
|
2.Installation
procedure
(1)
Use the parts cleaner (MZ100387 or equivalent) to clean the
mark installation surfaces
on the body.
(2)
|
|
| caution |
When attaching the
mark, the ambient temperature should
be
20 - 38°C and the air
should be completely free of dust.
If the ambient temperature
is lower than 20°C, the mark
and the place on the vehicle body
where the mark is to
be attached should be heated to 20
- 30°C.
|
|
Peel off the protection sheet on the back of the
mark to affix it in position.
(3)
Attach the V6 MIVEC mark so that its bottom edge is
horizontal to the vehicle.
|
