REMOVAL AND INSTALLATION


caution For the removal of the headlining, refer to GROUP 52B, Service Precautions and Curtain air bag module <Vehicles with curtain air bag> .
Pre-removal and Post-installation Operation
  • Removal and Installation of Front pillar trim, Centre pillar trim upper, Quarter upper trim (Refer to ).
  • Removal and Installation of Room Lamp Assembly (Refer to GROUP 54A, Interior Lamp ).




Removal steps
<<A>>
1.
 Sunvisor holder


2.
 Sunvisor


3.
 Roof inside assist grip


4.
 Assist grip clip


5.
 Assist grip cover


6.
 Roof inside assist grip


7.
 Roof inside assist grip


8.
 Roof ventilator air outlet


9.
 Headlining cover


10.
 Harness clip


11.
 Headlining clip
<<B>>
12.
 Headlining


13.
 Roof sub wiring harness


14.
 Assist grip bracket (Front)


15.
 Assist grip bracket (Centre)


16.
 Assist grip bracket (Rear)

REMOVAL SERVICE POINT

<<A>> SUN VISOR HOLDER REMOVAL

Insert the special tools ornament remover (MB990784) into the sun visor holder from its left and right sides to disengage the claws on the sun visor holder sides.

<<B>> HEADLINING REMOVAL

To remove the clip, insert a vinyl cord into a clearance between the clip and the headlining, and pass it around the clip. Then, pull out the clip downwards while pulling the vinyl cord.