REMOVAL AND INSTALLATION <VEHICLES WITH nanoe™>


The following bolts and screws are used for installing the instrument panel. Bolts and screws are indicated as marks shown in the illustration in the sections of "Removal and Installation."
Name
 Symbol
 Size (D × L) mm
 Colour
 Shape
Tapping screw

 a
 4 × 10
 -

b
 5 × 12
 -
Washer assembly bolt
 c
 6 × 16
 -

Flange bolt
 d
 8 × 20
 -

e
 10 × 20
 -
caution
  • Refer to GROUP 52B, Service Precautions and Passenger’s (front) Air Bag Module before removing the passenger’s (front) air bag module.
  • Do not subject the SRS-ECU to any shocks when removing or installing the instrument panel.
Pre-removal and Post-installation Operation
  • Front pillar trim removal and installation
  • Hood lock release handle removal and installation (Refer to GROUP 42A, Hood)
  • Passenger’s (front) air bag module removal and installation (Refer to GROUP 52B, Passenger’s (front) Air Bag Module)
  • Glove box removal and installation
  • Instrument lower panel removal and installation
  • Instrument lower centre panel assembly or instrument panel lower cover assembly removal and installation (Refer to )
  • Heater controller assembly removal and installation (Refer to GROUP 55A, Heater Control Unit)
  • Floor console removal and installation
  • Combination meter (Refer to GROUP 54A, Combination Meter)
  • Steering column shaft (Refer to GROUP 37, Steering Column Shaft Assembly)




Removal steps


1.
 Instrument panel side garnish


2.
 Instrument panel assembly


3.
 Defroster nozzle


4.
 Ventilator air distribution duct


5.
 Clip


6.
 Ventilator joint duct


7.
 Ion generator


8.
 Distribution duct bracket


9.
 Instrument panel side air outlet


10.
 Instrument panel


11.
 Front deck frame


12.
 Instrument panel stay


13.
 Instrument panel knee protector bracket


14.
 Front deck crossmember