REMOVAL AND INSTALLATION

<Standard type>

		Front floor console assembly removal steps
	·	Rear floor console assembly (Refer to )
	·	Shift knob (Refer to GROUP 22A, Transmission Control )
	1.	Front floor console assembly
	2.	Front console accessory box lid
<<A>>	3.	Gearshift lever panel
	4.	Front console garnish
	5.	Front console tray
	6.	Front floor console

<Large type>

			Front floor console assembly removal steps
		·	Shift knob (Refer to GROUP 23A, Transmission Control )
		·	Drive mode-selector connector connection
		·	Electric parking brake switch connector connection
		·	Hill descent control switch connector connection
		·	Off road switch connector connection
<<A>>		1.	Gearshift lever panel
	>>A<<	2.	Drive mode-selector
		3.	Electric parking brake switch
		4.	Hill descent control switch
		5.	Off-road mode selector
		6.	Front console garnish
		·	Rear floor console assembly (Refer to )
		7.	Front floor console

REMOVAL SERVICE POINT

<<A>> GEARSHIFT LEVER PANEL REMOVAL

Insert the ornament remover into the notch shown at the front floor console to make a clearance between the gearshift lever panel and the front floor console to disengage the clips.

INSTALLATION SERVICE POINT

>>A<< DRIVE MODE-SELECTOR/BEZEL INSTALLATION

Engage the rib of the drive mode-selector with (A) portion of the gearshift lever panel.