|
1.Replace the following
parts with new ones.
- Front impact sensor (Refer to
).
- SRS-ECU (Refer to
).
- Driver’s air bag module (Refer to
).
- Passenger’s (front) air bag module (Refer to
).
- Knee air bag module (Refer to
).
- Seat belt with pre-tensioner (Refer to
).
|
|
2.Check the following parts.
If there is an abnormality, replace with new
parts.
- Clock spring (Refer to
).
- Steering wheel, steering column
assembly
(1) Check that the
driver’s air bag module is installed to the
steering wheel correctly. (2) Check the steering
wheel for noise, binding, operational failure, and
play. (3) Check the shock absorbing mechanism of
steering column shaft assembly (Refer to GROUP 37
- On-vehicle Service ).
|
|
3.Instrument panel assembly
(Refer to GROUP 52A - Instrument Panel Assembly ).
|
|
4.Check the wiring harness
for binding, the connector for damage, and the terminal for
deformation (Refer to ).
|
|
1.Replace the following
parts with new ones.
- SRS-ECU (Refer to
).
- Front seatback assembly (Refer to
).
- Curtain air bag module (Refer to
).
- Side impact sensor (Refer to
).
- Headlining (Refer to GROUP 52A, Headlining
).
- Front pillar trim, centre pillar trim upper, rear
pillar upper trim (Refer to GROUP 52A -
Interior Trim
).
- Seat belt with pre-tensioner (Refer to
).
|
|
2.Check the wiring harness
for binding, the connector for damage, and the terminal for
deformation (Refer to ).
|
|
1.Check the SRS air bag
components and seat belt assembly according to the following
procedures.
|
|
2.Check the operation of
seat belt. If the seat belt cannot be drawn out, replace the
seat belt with a new one.
|
|
3.Visually check the seat
belt components (such as pre-tensioner, retractor and
buckle) for a dent, breaks, deformation, fraying. If found,
replace them with new one.
|
|
4.For removal and
installation of parts, refer to
"Servicing the SRS air bag/seat belt with pre-tensioner"
.
|
![](../../../img/52/ACE02356AB00ENG.png)
|
1.Check the SRS-ECU case and
bracket for dent, crack, or deformation. 2.Check
the connector and wiring harness for damage, and the
terminal for deformation. 3.Check that SRS-ECU is
installed correctly.
|
|
1.Check the pad cover for
dent, crack, or deformation.
|
![](../../../img/52/ACF01313AB00ENG.png)
|
2.Check the connector for
damage, the terminal for deformation, and the harness for
binding. 3.Check the inflator case for dent,
crack, or deformation. 4.Check that the air bag
module is installed correctly. 5.Check that the
curtain air bag deployment part of the headlining is
normal.
|
![](../../../img/52/ACF01435AB00ENG.png)
|
1.Check the connector and
protector tube for damage, and the terminal for
deformation. 2.Check the case for damage.
|
|
1.Check that the
driver’s air bag module is installed to the steering
wheel correctly.
|
|
2.Check the steering wheel
for noise, binding, operational failure, and play.
|
|
3.Check the shock absorbing
mechanism of steering column shaft assembly (Refer to GROUP
37 - On-vehicle Service ).
|
![](../../../img/52/ACE02554AB00ENG.png)
|
Check the connector for damage and
the terminal for deformation.
|
|
1.Check the radiator support
reinforcement for deformation.
|
|
2.Check the connector for
damage, the terminal for deformation, and the harness for
binding.
|
![](../../../img/52/ACE02553AC00ENG.png)
|
1.Check that the side-airbag
deployment part of the seat is normal. 2.Check the
connector for damage, the terminal for deformation, and the
harness for binding.
|
|
1.Check the centre pillar
for deformation.
|
|
2.Check the connector for
damage, the terminal for deformation, and the harness for
binding.
|
|
Check the wiring harness for
binding, the connector for damage, and the terminal for
deformation (Refer to ).
|