Code No.B1426 Malfunction of G-sensor inside right side impact sensor
Code No.B1436 Malfunction of G-sensor inside left side impact sensor
| caution |
If diagnosis code No. B1426 or B1436 is set in the SRS-ECU, be sure to diagnose the CAN bus line.
|
TROUBLE JUDGEMENT
- Analogue G-sensor for side impact does not operate.
- Characteristics of analogue G-sensor for side impact are abnormal.
- Output of analogue G-sensor for side impact is abnormal.
PROBABLE CAUSES
- Malfunction of side impact sensor (RH) (for diagnosis code B1426)
- Malfunction of side impact sensor (LH) (for diagnosis code B1436)
|
|
STEP 1. M.U.T.-III CAN bus diagnostics.
|
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
|
Q.
Is the check result normal?
|
|
|
 Go to Step 2.
|
|
|
|
|
|
 Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting  ).
|
|
|
|
|
|
STEP 2. Side impact sensor check.
|
|
|
(1)Check that the negative battery terminal is disconnected. If the negative battery terminal is connected, disconnect it.
|
|
|
(2)Alternate the side impact sensor (RH) and the side impact sensor (LH), and then install the alternated sensor.
|
|
|
(3)Connect the negative battery terminal.
|
|
|
(4)After erasing the diagnosis code memory, check the diagnosis code again.
|
|
|
(5)Disconnect the negative battery terminal.
|
|
|
Q.
Is diagnosis code No. B1426 or B1436 set?
|
|
|
Replace the SRS-ECU (Refer to ).
|
|
|
|
|
|
The procedure is complete.
|
|
|
|