CUSTOMISATION FUNCTION


Using the ETACS system of M.U.T.-III, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
Adjustment item (M.U.T.-III display)
Adjustment item
Adjusting content (M.U.T.-III display)
Adjusting content
Turn power source
Adjustment of turn-signal lamp operation condition
ACC or IG1
Operable with ACC or ON position
IG1
Operable with ON position (Initial condition)
Comfort flasher
With/without comfort flasher function
Disable
No function
Enable
With function (Initial condition)
Comfort flasher switch time
Switch operation time to activate the comfort flasher function
400ms
0.4 second (Initial condition)
800ms
0.8 second
Head lamp auto cut customize
Adjustment of headlamp automatic shutdown function
Disable
No function
Enable (B-spec.)
With function (Initial condition)
Automatic lamp sensitivity (RLS)
Lighting control sensor sensitivity (illumination intensity) <Vehicles with lighting control sensor (rain sensor)>
Level 1 bright
High-high ambient brightness
Level 2 bright
High ambient brightness
Level 3
Standard ambient brightness (initial condition)
Level 4 dark
Low ambient brightness
Level 5 dark
Low-low ambient brightness
Coming home light
Disabling or enabling coming home light function
Disable
No function
15 sec
The headlamps illuminate for 15 seconds.
30 sec
The headlamps illuminate for 30 seconds. (initial condition)
60 sec
The headlamps illuminate for 60 seconds.
180 sec
The headlamps illuminate for 180 seconds.
Welcome light
Disabling or enabling welcome light function
Disable
No function
Small lamp
The tail lamps and position lamps illuminate. (initial condition)
Head lamp
The headlamps illuminate.