DISASSEMBLY AND REASSEMBLY

<Vehicles with halogen type headlamp>

			Removal Steps
		1.	Socket cover
<<A>>		2.	Headlamp bulb
		3.	Position lamp bulb
		4.	Front turn-signal lamp bulb
	>>A<<	5.	Headlamp garnish
		6.	Headlamp body

<Vehicles with LED type headlamp>

		Removal Steps
	1.	Headlamp control unit
	2.	Gasket
	3.	Front turn-signal lamp bulb
>>A<<	4.	Headlamp garnish
	5.	Headlamp body

DISASSEMBLY SERVICE POINTS

<<A>> HEADLAMP BULB REMOVAL

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

REASSEMBLY SERVICE POINT

>>A<< HEADLAMP GARNISH INSTALLATION

caution

The ambient temperature should be 20 to 38°C. Ensure that the working area is clean.
If ambient temperature is less than 20°C, heat the headlamp garnish and the headlamp (headlamp garnish mounting surface) to 20°C to 30°C.
Securely compress immediately after installation.

1.Degrease the headlamp (headlamp garnish mounting surface) with the Mitsubishi Genuine parts cleaner (MZ100387 or equivalent).

2.Peel off a backing strip and attach the headlamp garnish to the installation position.