|
Q.
Which type of head lamp?
|
|
Bulb type <halogen type headlamp> : Go to Step 2.
|
|
|
|
LED type headlamp <LED type headlamp> : Go to Step 3.
|
|
|
|
Check the bulb(s) of the position lamp that does not illuminate.
|
|
Q.
Is the check result normal?
|
|
Replace the bulb(s) of the lamp that does not illuminate (Refer to ).
|
|
|
|
(1)Disconnect the connector, and measure at the wiring harness side.
|
|
(2)Measure the resistance between the connector of lamp which does not illuminate
and the body earth.
- Measure the resistance between the headlamp assembly
(position: LH) connector (- terminal) and the body earth.
- Measure the resistance between the headlamp assembly (position: RH) connector (-
terminal) and the body earth.
OK: Continuity exists (2 Ω or less)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to use Troubleshooting/inspection Service Points - How to Cope with Intermittent
Malfunction ).
|
|
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Check that the position lamps illuminate normally.
|
|
Q.
Is the check result normal?
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to use Troubleshooting/inspection Service Points - How to Cope with Intermittent
Malfunction ).
|
|
|
|
Replace the position lamp which does not illuminate (Refer to ).
|
|
|