SERVICE REMINDER FUNCTION SET



HOW TO SET BY SPECIAL OPERATION OF SWITCH


By operating the multi information display switch of the combination meter, the service reminder warning cancellation and the schedule setting can be performed.

HOW TO CANCEL THE SERVICE REMINDER WARNING


caution
  • Be careful not to execute the service reminder warning cancellation by operating the switch again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
  • If the next warning period is cancelled by mistake, the cancelled warning period can be restored by setting a schedule different from the current one once, and then returning it to the previous schedule.
1.Turn the ignition switch to the "OFF" position.
2.By operating the multi information display switch, the warning period is displayed on the odometer.
3.Press the multi information display switch once for 1.0 seconds or longer.
4.The service reminder indicator flashes.
5.While the service reminder indicator flashes, press the multi information display switch once for less than 1.0 seconds.
6.The service reminder indicator is turned ON, and "CLEAR" is displayed on the odometer display for 3 seconds.
7.After "CLEAR" is displayed for 3 seconds, the warning period to the next time is displayed.

HOW TO SET THE SCHEDULE


1.Turn the ignition switch to the "OFF" position.
2.By operating the multi information display switch, the warning period is displayed on the odometer.
3.Press the multi information display switch once for 1.0 seconds or longer.
4.The service reminder indicator flashes.
5.While the service reminder indicator flashes, press the multi information display switch for 1.0 seconds or longer and 3 times consecutively.
6.The service reminder indicator is turned ON, and the current schedule is displayed on the odometer display.
7.While the current schedule is displayed, press the multi information display switch for less than 1.0 seconds and 3 times consecutively.
8.The odometer display is shifted to the schedule selection mode.
9.When the multi information display switch is pressed for less than 1.0 seconds, the schedule is shifted, and when the switch is pressed for 1.0 seconds or longer, the displayed schedule is set.
note For schedule, "JPN", "EU", "NAS", "GCC/EXP", "MMAL" and "SEVERE" can also be selected. However, the using shall be for "Normal" only.
10.The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.


Schedule table
Schedule
Warning type
Warning criteria
Normal
Elapsed time (month)
Every 6 elapsed months <Except vehicles for Russia and Australia and New Zealand>
Every 12 elapsed months <Vehicles for Russia and Australia and New Zealand>
Driving distance (miles)
Every 6,000 miles of driving distance <Except vehicles for Russia and Australia and New Zealand>
Every 12,5000 miles of driving distance <Vehicles for Russia>
Every 10,000 miles of driving distance <Vehicles for Australia and New Zealand>
Driving distance (km)
Every 10,000 km of driving distance <Except vehicles for Russia and Australia and New Zealand>
Every 20,000 km of driving distance <Vehicles for Russia>
Every 15,000 km of driving distance <Vehicles for Australia and New Zealand>