|
Refer to GROUP 55B - Inspection, Ambient Temperature Sensor Check .
|
|
Q.
Is the check result normal?
|
|
Replace the ambient temperature sensor (Refer to GROUP 55B - Ambient temperature sensor ).
|
|
|
|
(1)Disconnect the ambient temperature sensor connector, the measure at the harness side.
|
|
(2)Measure the resistance between the Disconnect the ambient temperature sensor connector, the measure at the harness side. connector (SENG terminal) and the body earth. OK: Continuity exists (2 Ω or less)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Check that the ambient temperature sensor circuit works normally.
|
|
Q.
Is the check result normal?
|
|
The procedure is complete.
|
|
|
|
Replace the combination meter (Refer to ).
|
|
|