![](../../../img/54/AC809168AB00ENG.png)
|
1.Disconnect the sensor
connector and connect the special tool test harness
(MB991658) as shown. 2.Turn the ignition switch to
the ON position. 3.Measure the voltage of sensor
connector terminal No. 2.
|
![](../../../img/54/ACF02329AB00ENG.png)
|
4.Check that voltages show
the values described in the graph according to the sensor
operation angle.
|
![](../../../img/54/AC809168AB00ENG.png)
|
1.Disconnect the sensor
connector and connect the special tool test harness
(MB991658) as shown. 2.Turn the ignition switch to
the ON position. 3.Measure the voltage of sensor
connector terminal No. 2.
|
![](../../../img/54/ACF02330AB00ENG.png)
|
4.Check that voltages show
the values described in the graph according to the sensor
operation angle.
|