Code No. B2510 Height Sensor Not Initialised


caution
  • If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, always diagnose the CAN bus lines.
  • Before replacing the ECU, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.

DIAGNOSTIC FUNCTION


When the headlamp automatic levelling system initialisation * is not implemented, the headlamp automatic levelling system warning is displayed on the multi information display and code No. B2510 is set. When the headlamp automatic levelling system initialisation is completed, code No. B2510 is cleared automatically.
note *: When the height sensor related diagnosis code (B2514, B2515 or B2516) or headlamp automatic levelling-ECU related diagnosis code (B2511 or B2512) is set, initialisation of the headlamp automatic levelling system is impossible, therefore perform the troubleshooting for the diagnosis code that has been set previously.

JUDGEMENT CRITERIA


Initialisation of the headlamp automatic levelling system is not completed.

PROBABLE CAUSES