Code No. U119B: Coding not completed
caution |
- If diagnosis code No. U119B is set, be sure to diagnose the CAN bus line.
- Whenever the ECU is replaced, ensure that the communication circuit is normal.
|
DIAGNOSTIC FUNCTION
Diagnosis code No. U119B will be set when the coding data has not been written to the headlamp automatic levelling-ECU.
PROBABLE CAUSE
Coding data has not been written to the headlamp automatic levelling-ECU.
DIAGNOSIS PROCEDURE
Diagnosis code recheck
Check again if the diagnosis code is set in the headlamp automatic levelling-ECU.
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(3)Check if the diagnosis code is set.
|
Q.
Is the diagnosis code set?
Replace the headlamp automatic levelling-ECU (Refer to
).
The procedure is complete.